http://www.dymo-label-printers.co.uk/mac-driver.html

The good news is these are priced around £26.99/box vs approx £7.41/box for the 99010′s.   That gives a per label cost of 1.3p/label vs 2.9p/label – less than half the price…

The only downside is that these High Yield “Jumbo Rolls” only fit the Labelwriter 4XL extra wide printer, not the LW450, Turbo, Twin or DUO.  That’s is because in order to squeeze as many labels onto the rolls as possible the labels have been put in landscape orientation (ie. sideways), and therefore the roll is too wide to fit the standard printers.

One more thing, you will need to update your Dymo Label Software (if you use it) to the latest version so it can recognise the new label.

The new rolls have the p/n S0947410 and are limited to a small number of suppliers only.

To get the free Label Writer follow these instructions:

1. Add the 12 (or more) 99012 labels to your basket
2. Enter the code LW450FREE in the coupon code box on the basket page (press ‘update’)
3. A message will appear saying “Get a LabelWriter 450 free by adding it to the cart”
4. Click on the link in the message
5. The labelwriter will be added to the basket, and you will not be charged for it.
6. Proceed with your order

Finally, within a couple of months, we should be able to get genuine Dymo Labelwriter labels with full colour pre-printing. Want your company logo on your labels? In full Colour? Maybe even a custom size label?

It should all be possible soon – though at a cost. There’ll be a fee for setting up the template (which can be reused if you order again), and the labels will obviously cost more than blank ones. If you want a custom size of label – something that’s not been possible with the labelwriter printers previously – then there will be an initial one-off tooling cost for the thingamybob that cuts the labels.

It’s also anticipated that the lead time will be 2 months initially. If you have any interest in these send an email to the helpful folks at Dymo Label Printers.

Polypropelene labels (ie. water resistant – by popular demand!)

High Yield labels – these will be the popular 99012 and 99014 labels, but with many more on the roll giving better value for money and fewer roll changes. The bad news is this is acheived by rotating the labels into landscape rather than portrait format, which means… think about it… they will be too wide to fit the output slot of the standard printers. So the Hi-Yield labels will only fit the extra wide Labelwriter 4XL printer. So “bummer” if you already have an LW450/Turbo/Twin/Duo (or earlier), “Yay” if you have a 4XL already, and “oh well it might be worth the extra to go for the wide version after all” if you are still deciding…

There’s also a super secret label – but we can’t tell you about that…

As a new label it has the unwieldy new style of part codes “S0929120″ rather than the old legacy 99xxx or 11xxx codes which were much easier to remember!

More new to follow shortly on the other two new entries to the Labelwriter range.

So if you use a lot of these, don’t hang about – fill your boots while you can, 15% is a big increase and they’re unlikely to get any cheaper in future…

Note that is the Dymo 1000/5000 not the Dymo RhinoPRO 1000/5000 which are completely different.

Users of the ancient Dymo 1000 label printers are invited to email Dymo Label Printers for news on a potential solution (or of course just buy a new Label Maker!).